purefil

purefil PLA minttürkis 1kg 1.75mm Refill


Item number 102614
graduated prices:
Minimum quantity: 5 EUR 17.10 EUR 17.10 / kilogram
EUR 17.10 / kilogram
Minimum quantity: 10 EUR 16.20 EUR 16.20 / kilogram
EUR 16.20 / kilogram
Minimum quantity: 20 EUR 14.40 EUR 14.40 / kilogram
EUR 14.40 / kilogram

EUR 18.00 *
Content 1000 gram
Unit price EUR 18.00 / kilogram
Ready for shipping, delivery in 48h

* Incl. VAT excl. Shipping


The purefil refill packs are wound filaments that are supplied without a spool. With this product, the purefil plastic spools can be refilled with new filament. This means that the empty spool no longer has to be disposed of and resources are saved.

The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process. Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each coil is sealed in a high-quality bag.

- Made in Switzerland

- small diameter and roundness tolerances

- easy to print

Polyactide is a polymer that consists of lactic acid molecules, among other things.
We currently have PLA filament 1.75 mm and PLA filament 2.85 mm in our range.
A heated bed is advantageous for PLA filament, but not essential.
We recommend using an air cooler when processing PLA filament.
Furthermore, PLA is characterized by many times more pleasant odor properties
than other plastics during processing.
However, the temperature below which PLA starts to soften is relatively low.
Even at high temperatures in summer, PLA parts can deform!
As a starting material, PLA is basically biological under special conditions
degradable. However, the final product contains pigments and additives. Because of that
the PLA parts still have to be disposed of in the garbage and not in the garden.
This filament meets the compositional requirements of European
Regulation No. 10/2011 on plastic materials intended for food contact.

Characteristics:

- minimal shrinkage

- little delay

- Low water absorption

- Soluble in many organic solvents

- High UV resistance

- Low flammability

- Heat resistance up to approx. 60°C

PLA filament or polylactide is in principle biodegradable, whereby certain environmental conditions are necessary, which can usually only be found in industrial composting plants. PLA does not normally decompose in nature. We therefore do not recommend composting PLA filament or printed parts made of PLA.

Material: PLA

Diameter: 1.75 +/- 0.05mm

Weight: 1kg

Nozzle temperature: 190-230 ° C

Printing table temperature: 50-70 ° C

Item ID 183
Condition New
Age rating 3 and older
Model 102614
Manufacturer purefil
Manufacturing country Switzerland
Content 1000 gram
Weight 1150 g
Net weight 1000 g
Dimensions 202×202×70mm
Customs tariff number 39169000

technical datasheet DE Materialdatenblatt PLA purefil.pdf

technical datasheet EN material data sheet PLA purefil.pdf

Diese Produkte könnten ebenfalls interessant für Sie sein!