The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process. Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each coil is sealed in a high-quality bag.

- Made in Switzerland

- small diameter and roundness tolerances

- easy to print

Polycarbonate is a very advanced, mechanically and thermally stable filament specially designed for 3D printing. In addition to high print quality, high mechanical strength and heat resistance, PC offers excellent impact resistance and fracture toughness, making it the ideal choice for engineering applications.
Caution is required with regard to stress cracks, the effects of hot water and acids/bases such as acetone. The component can then become very brittle and break or shatter without warning. For processing, make sure that the filament is dry and that your printer can reach sufficiently high temperatures.

Characteristics:

- High strength, hardness and toughness
- Temperature resistance from -150 to +135°C
- Good electrical insulation abilities
- Low shrinkage
- PC can be sterilized at 120°C
- PC is prone to stress cracking
- PC is notch sensitive
- PC burns, but goes out again after removing the source of ignition
- PC is resistant to petrol, fats, oils and aliphatic saturated hydrocarbons
- PC is not resistant to strong acids and alkalis, aromatic and chlorinated hydrocarbons and long-term exposure to hot water

purefil PC transparent 1kg 1.75mm

Last seen