purefil MABS gelb transparent 1kg 1.75mm

The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process. Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each coil is sealed in a high-quality bag.

- Made in Switzerland

- small diameter and roundness tolerances

- easy to print

MABS is the transparent version of ABS. ABS is normally opaque/milky when uncolored.
With the MABS, the proportion responsible for the turbidity of the material has been reduced. This also means that the tendency to shrink is lower than with ABS. The result is better adhesion to the printing plate.
In contrast to ABS, the odor development is a lot better.
The plastic also fulfills an essential requirement for materials in medical technology, namely sterilizability.

Characteristics:

- High impact and notched impact strength even at low temperatures (down to -40°C)

- High scratch resistance and hardness

- High toughness

- Good soundproofing capacity

- High dimensional stability under heat and thermal shock resistance (up to 100°C)

- Good chemical resistance

- Good resistance to stress cracking

- Low water absorption

Material: MABS

Diameter: 1.75 +/- 0.05mm

Weight: 1kg

Nozzle temperature: 210-260 ° C

Printing table temperature: 80-110 ° C