purefil PA12 CF15 tiefschwarz 1kg 1.75mm

The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process. Very low manufacturing tolerances are achieved using a state-of-the-art manufacturing process, which leads to convincing print results with all FDM 3D printers. Each spool is sealed in a high-quality bag.
-Made in Switzerland
- low diameter and roundness tolerances
- easy to print

Our PA12 CF is an amorphous thermoplastic with 15% carbon fiber content. This leads to a significant increase in rigidity. As PA12 is the polyamide type with the lowest water absorption, the material is best suited for humid environments where high impact strength, good sliding friction properties and good wear resistance are required. PA12 CF15 is antistatic.

The carbon fiber reinforcement also increases the material's heat deflection temperature. Another positive effect is that the filament is even easier to print than the unreinforced PA12.

The increased wear in the pressure nozzle must be taken into account and can be minimized by using hardened steel nozzles.

- high rigidity
- Easier to print than unreinforced PA12
- High hardness
- Antistatic
- Low shrinkage

- Low water absorption

Material: PA12 CF15

Diameter: 1.75 +/- 0.05mm

Weight: 1kg

Nozzle temperature: 255-275 ° C

Printing table temperature: 100-120 ° C