The Elegoo Neptune 4 has a build volume of 22.5x22.5x26.5cm, it has 11x11 auto leveling and comes pre-installed with Klipper firmware.
The Neptune 4 can achieve a printing speed of up to 500mm/s. We do recommend a printing speed of 250mm/s to get the best results. It has a self developed dual gear direct-drive extruder and comes with a 300°C high-temp nozzle. The PEI magnetic platform makes sure that you will have good adhesion and ensures warping resistance.
It is designd for quiet and precise printer. All axes have silent drivers and reduces the noise to 50db. The intelligent segmented heatbed adds efficiency and energy saving to the printer. If you are printing small objects (12x12cm) you can set the bed to 100W and it will only heat the center area.
| Nozzle properties | |
|---|---|
| Max. hot-end temperature | 300 °C |
| Dimensions | |
| Height | 475 mm |
| Width | 445 mm |
| Depth | 515 mm |
| 3D printer properties | |
| Buildvolume | 22.5x22.5x26.5 cm |
| Max. printing speed | 500 mm/s |
| Filament types | PLA,PETG,Flexibles |
| Max. heated bed. temp. | 110 °C |
| Type of 3D printer | FDM/FFF |
| Dimensions | |
| Compatible diameter filament | 1.75 mm |
| Features | |
| Display type | 4.3" Screen |
| Type of control interface | Touch screen |
| USB | Yes |
| Heated bed | Yes |
| Auto Bed Leveling | Yes |
| Network | Yes |
| Filament sensor | Optical |
| Bed level sensor | Inductive |
| Electrical specifications | |
| Input voltage | 100/240 V |
| Extruder properties | |
| Number of extruders | 1 |
| Filament diameter | 1.75 mm |
| Extruder type | Direct-drive |
Diese Produkte könnten ebenfalls interessant für Sie sein!